Trade Shows

All posts in the Trade Shows category

The Hedman Performance Group Captures the Attention of SEMA Show-Goers

Published December 22, 2016 by Kahn Media

6y8a1997

The Hedman Performance Group had a busy booth this year at the 2016 SEMA Show. Aside from the displays filled with awesome new parts, one of the biggest reasons for the popularity was the unveiling of the PCHRODS “50/50” Camaro built by Rob Phillips. We also debuted lots of new parts that help make your ride faster and perform better. Von Hot Rod joined in the fun as well this year, greeting fans and pinstriping items for them as well as helping with the giveaway of his two custom-built Hedman Hedders lamps. Read the rest of this entry →

Hedman Hedders Debuts PCHRods Camaro at SEMA 2016

Published September 16, 2016 by Kahn Media

pchrods-69-camaro-render-w-sponsors

The Hedman Performance Group is excited to host the unveil the Intro Wheels Camaro built by Rob Phillips of PCHRODS at the 2016 SEMA Show.  Commissioned by Jose Moreno, the owner of Intro Wheels, this one of a kind 1969 Camaro was built to combine modern luxury with pro-touring performance.  The result is a car with the class, sophistication, and performance to rival any modern luxury sports car.  The unveil will be taking place on Tuesday, November 1st, 2016 at 10:30am in the Hedman booth (#22343) and will also be broadcast live on the Hedman Facebook page [link: www.facebook.com/hedmannation].

For more information on unveiling follow us on our Facebook page at https://www.facebook.com/HedmanNation/. Also follow us on Instagram https://www.instagram.com/hedmanperformance/ . For more information about Hedman Hedders, visit our website at http://www.hedman.com/.

SEMA 2013 New Product: Trans Dapt PerfectMatch Engine Kits

Published November 26, 2013 by hedmanperformancegroup

TRANS DAPT MAKES IT EVEN EASIER TO UPDATE THE LOOKS OF YOUR ENGINE BAY

PerfectMatch Engine Kits

PerfectMatch™OEM-color powder coated engine accessories kits give you everything you need to refresh the looks of your engine in one convenient package.

Whittier, Calif. (November, 2013) – There is no better way to improve the look of your engine bay than by replacing all of the old, beat up, or rusted metal accessories and covers.  Whether you are performing a complete factory restoration or a stealthy performance build, Trans Dapt’s PerfectMatch™ products give you the high-quality replacement parts with the show-stopping appearance you are looking for.  Now, with the introduction of the PerfectMatch™ Engine Kits, choosing the right parts for your Small Block Chevy, Big Block Chevy, or Small Block Ford build has become a piece of cake. Read the rest of this entry →

SEMA 2013 Preview: CW Restoration’s 1957 Cameo

Published October 31, 2013 by hedmanperformancegroup

1957-Cameo3

CW Restoration Shop has a second vehicle it is bringing out to the 2013 SEMA Show – a 1957 Chevy Cameo pickup.   This pickup hosts a number of upgrades from the Hedman Performance Group on its small block powerplant including a set of Hedman Hedders, Hamburger’s Performance Valve Covers, and a Trans Dapt dipstick.  Emphasizing the smallest of details is what this truck is all about.  Looking at the finish of the wood in the bed, the trim and gauges on the dash, and colored accenting throughout shows the kind of attention to detail that this world class builder put into this project.

This beautiful Cameo will be on display in the Griffin Thermal Products booth (#24935) of the SEMA Show in the Central Hall, so make sure you stop by and check it out.  For more pictures of the build, check out the gallery below or head on over to CW Restoration Shop’s Facebook.

This slideshow requires JavaScript.

SEMA 2013 Preview: The Custom Shop’s “Stroker Chevelle”

Published October 31, 2013 by hedmanperformancegroup

615026_10200553030739766_1335752345_o

The Custom Shop is bringing a two Hedman-equipped vehicles to the 2013 SEMA Show – the SSL727 Camaro and this “Stroker Chevelle.”  This 1966 Chevelle gets its name from the stroked 408cid LS3 powerplant under its hood.  Fortified with all sorts of aftermarket goodies like a Howards custom camshaft, Manley rotating assembly, Edelbrock high rise intake, twin Holley “Terminator EFI” throttle bodies, and Hedman Hedders, this all-aluminum mill cranks out a whopping 600+hp and 545+ft-lbs of torque.  But like every good SEMA car, monster power is only part of the story – these cars have to look as good as they go.  Every panel of this Chevelle’s body has been replaced with brand new sheet metal from Goodmark and covered in Pro-Spray paint with custom striping.  Riding on Weld Racing Wheels, this A-Body’s lowered stance comes courtesy of MBM tubular control arms and drop spindles with Firestone Air Ride delivering a smooth ride.

The Stroker Chevelle will be on display outside of the SEMA Show in the Car Crazy booth so make sure you stop by and check it out.  For more pictures of the build, check out the gallery below or head on over to builder John Wargo’s Facebook.

This slideshow requires JavaScript.

SEMA 2013 Preview: The Custom Shop’s SSL727 Camaro

Published October 31, 2013 by hedmanperformancegroup

SSL727camaro

John Wargo from The Custom Shop is bringing this wild 5th Gen Camaro out to the 2013 SEMA Show.  John and his crew left nothing untouched on this highly customized Camaro they call SSL727.  The body has been widened front and rear with custom fender flares that flow into redesigned front and rear bumpers.  The car has also undergone a conversion from 2+2 convertible to two-seat roadster with a custom 5,000-watt Sony audio/video system taking residence in the former rear seating area hiding underneath the motorized tonneau cover.  But don’t fool yourself into thinking that this Camaro is all show and no go.  The 727 in its moniker comes from the horsepower output of the Procharged LSX376 with Hedman Hedders hiding underneath its highly stylized hood.  Bringing this monster to a stop is the job of its 16-inch Brembo brakes that reside within the 22-inch Forgeline wheels while its Eibach suspension and Granatelli subframe connectors keep it firmly planted on the road.

SSL727 will be on display outside of the SEMA Show in the Car Crazy booth so make sure you stop by and check it out.  For more pictures of the build, check out the gallery below or head on over to builder John Wargo’s Facebook.

This slideshow requires JavaScript.